Search This Blog

Thursday 12 January 2012

Critical factors for new product developments in SMEs virtual team

African Journal of Business Management
Volume 4, Issue 11, 4 September 2010, Pages 2247-2257
ISSN: 19938233
Document Type: Article
Source Type: Journal


Critical factors for new product developments in SMEs virtual team

Department of Engineering Design and Manufacture, Faculty of Engineering, University of Malaya (UM), Kuala Lumpur 50603, Malaysia


Abstract

Small and medium enterprises (SMEs) are considered as an engine for economic growth all over the world and especially for developing countries. During the past decade, new product development (NPD) has increasingly been recognized as a critical factor in ensuring the continued survival of SMEs. On the other hand, the rapid rate of market and technological changes has accelerated in the past decade, so this turbulent environment requires new methods and techniques to bring successful new products to the marketplace. Virtual team can be a solution to answer the requested demand. However, literature have shown no significant differences between traditional NPD and virtual NPD in general, whereas NPD in SME's virtual team has not been systematically investigated in developing countries. This paper aims to bridge this gap by first reviewing the NPD and its relationship with virtuality and then identifies the critical factors of NPD in virtual teams. The statistical method was utilized to perform the required analysis of data from the survey. The results were achieved through factor analysis at the perspective of NPD in some Malaysian and Iranian manufacturing firms (N = 191). The 20 new product development factors were grouped into five higher level constructs. It gives valuable insight and guidelines, which hopefully will help managers of firms in developing countries to consider the main factors in NPD. © 2010 Academic Journals.

Language of original document

English

Author keywords

Factor analysis; New product development; Survey findings; Virtual team

References (59) View in table layout


Acs, Z.J., Morck, R., Shaver, J.M., Yeung, B.

The Internationalization of Small and Medium-sized Enterprises: A Policy Perspective
(1997) Small Business Economics, 9 (1), pp. 7-20. Cited 78 times.

Akgün, A.E., Dayan, M., Di Benedetto, A.

New product development team intelligence: Antecedents and consequences
(2008) Information and Management, 45 (4), pp. 221-226. Cited 9 times.
doi: 10.1016/j.im.2008.02.004

Akgün, A.E., Lynn, G.S., Yilmaz, C.

Learning process in new product development teams and effects on product success: A socio-cognitive perspective
(2006) Industrial Marketing Management, 35 (2), pp. 210-224. Cited 24 times.
doi: 10.1016/j.indmarman.2005.02.005

Ebrahim, N.A., Ahmed, S., Taha, Z.

Virtual R & D teams in small and medium enterprises: A literature review
(2009) Scientific Research and Essays, 4 (13), pp. 1575-1590. Cited 8 times.
http://www.academicjournals.org/sre/PDF/pdf2009/Dec%202/Ale%20Ebrahim%20et%20al.pdf



Ale Ebrahim, N., Ahmed, S., Taha, Z.

Virtual Teams for New Product Development-An Innovative Experience for R&D Engineers
(2009) Eur. J. Educ. Stud., 1, pp. 109-123. Cited 2 times.


Ebrahim, N.A., Ahmed, S., Taha, Z.

Virtual teams: A literature review
(2009) Australian Journal of Basic and Applied Sciences, 3 (3), pp. 2653-2669. Cited 6 times.
http://www.insipub.com/ajbas/2009/2653-2669.pdf



Ayyagari, M., Beck, T., Demirguc-Kunt, A.

Small and medium enterprises across the globe
(2007) Small Business Economics, 29 (4), pp. 415-434. Cited 21 times.
doi: 10.1007/s11187-006-9002-5

Badrinarayanan, V., Arnett, D.B.

Effective virtual new product development teams: An integrated framework
(2008) Journal of Business and Industrial Marketing, 23 (4), pp. 242-248. Cited 7 times.
doi: 10.1108/08858620810865816

Büyüközkan, G., Baykasolu, A., Dereli, T.

Integration of Internet and web-based tools in new product development process
(2007) Production Planning and Control, 18 (1), pp. 44-53. Cited 7 times.
doi: 10.1080/09537280600940705

Chen, H.H., Kang, H.-Y., Xing, X., Lee, A.H.I., Tong, Y.

Developing new products with knowledge management methods and process development management in a network
(2008) Computers in Industry, 59 (2-3), pp. 242-253. Cited 19 times.
doi: 10.1016/j.compind.2007.06.020

Choi, T.Y.

Korea's small and medium-sized enterprises: Unsung heroes or economic laggards?
(2003) Academy of Management Executive, 17 (2), pp. 128-129. Cited 5 times.

Corso, M., Martini, A., Paolucci, E., Pellegrini, L.

Knowledge management configurations in Italian small-to-medium enterprises
(2003) Integrated Manufacturing Systems, 14 (1), pp. 46-56. Cited 19 times.
doi: 10.1108/09576060310453344

Cronbach, L.J.

Coefficient alpha and the internal structure of tests
(1951) Psychometrika, 16 (3), pp. 297-334. Cited 7391 times.
doi: 10.1007/BF02310555

Denscombe, M.

Web-based questionnaires and the mode effect: An evaluation based on completion rates and data contents of near-identical questionnaires delivered in different modes
(2006) Social Science Computer Review, 24 (2), pp. 246-254. Cited 33 times.
doi: 10.1177/0894439305284522

Denscombe, M.

The length of responses to open-ended questions: A comparison of online and paper questionnaires in terms of a mode effect
(2008) Social Science Computer Review, 26 (3), pp. 359-368. Cited 7 times.
doi: 10.1177/0894439307309671

Deros, B.M., Yusof, S.M., Salleh, A.M.

A benchmarking implementation framework for automotive manufacturing SMEs
(2006) Benchmarking, 13 (4), pp. 396-430. Cited 29 times.
doi: 10.1108/14635770610676272

Deutskens, E., De Ruyter, K., Wetzels, M.

An assessment of equivalence between online and mail surveys in service research
(2006) Journal of Service Research, 8 (4), pp. 346-355. Cited 29 times.
doi: 10.1177/1094670506286323

Durmusoglu, S.S., Calantone, R.J., Sambamurthy, V.

Is more information technology better for new product development?
(2006) Journal of Product and Brand Management, 15 (7), pp. 435-441. Cited 10 times.
doi: 10.1108/10610420610712810

Egbu, C.O., Hari, S., Renukappa, S.H.

Knowledge management for sustainable competitiveness in small and medium surveying practices
(2005) Structural Survey, 23 (1), pp. 7-21. Cited 37 times.
doi: 10.1108/02630800510586871

Eikebrokk, T.R., Olsen, D.H.

An empirical investigation of competency factors affecting e-business success in European SMEs
(2007) Information and Management, 44 (4), pp. 364-383. Cited 21 times.
doi: 10.1016/j.im.2007.02.004

Fathian, M., Akhavan, P., Hoorali, M.

E-readiness assessment of non-profit ICT SMEs in a developing country: The case of Iran
(2008) Technovation, 28 (9), pp. 578-590. Cited 18 times.
doi: 10.1016/j.technovation.2008.02.002

Gassmann, O., Keupp, M.M.

The competitive advantage of early and rapidly internationalising SMEs in the biotechnology industry: A knowledge-based view
(2007) Journal of World Business, 42 (3), pp. 350-366. Cited 28 times.
doi: 10.1016/j.jwb.2007.04.006

Griffin, A., Somermeyer, S.
(2007) The PDMA Tool Book 3 for New Product Development. Cited 55 times.
John Wiley & Sons, Inc


Hanna, V., Walsh, K.

Small firm networks: A successful approach to innovation?
(2002) R and D Management, 32 (3), pp. 201-207. Cited 38 times.



Hoffman, K., Parejo, M., Bessant, J., Perren, L.

Small firms, R&D, technology and innovation in the UK: A literature review
(1998) Technovation, 18 (1), pp. 39-55. Cited 102 times.

Johansen, K.
(2005) Collaborative Product Introduction within Extended Enterprises. Cited 2 times.
PdD, Linköpings Universitet


Kotelnikov, V.

Small and Medium Enterprises and ICT
(2007) Asia-Pacific Development Information Programme (UNDP-APDIP) e-Primers for the Information Economy, Society and Polity
In: HAKSU, K. (ed.), Bangkok: UNDP Regional Centre


Kratzer, J., Leenders, R., Engelen, J.V.
(2005) Keeping Virtual R&D Teams Creative, pp. 13-16. Cited 2 times.
Industrial Research Institute, Inc., March-April


Krishnan, V., Ulrich, K.T.

Product development decisions: A review of the literature
(2001) Management Science, 47 (1), pp. 1-21. Cited 322 times.

Laforet, S., Tann, J.

Innovative characteristics of small manufacturing firms
(2006) Journal of Small Business and Enterprise Development, 13 (3), pp. 363-380. Cited 25 times.
doi: 10.1108/14626000610680253

Lam, P.-K., Chin, K.-S., Yang, J.-B., Liang, W.

Self-assessment of conflict management in client-supplier collaborative new product development
(2007) Industrial Management and Data Systems, 107 (5), pp. 688-714. Cited 5 times.
doi: 10.1108/02635570710750435

Reference information not available.

Leenders, R.Th.A.J., Van Engelen, J.M.L., Kratzer, J.

Virtuality, communication, and new product team creativity: A social network perspective
(2003) Journal of Engineering and Technology Management - JET-M, 20 (1-2 SPEC.), pp. 69-92. Cited 99 times.
doi: 10.1016/S0923-4748(03)00005-5

Levy, M., Loebbecke, C., Powell, P.

SMEs, co-opetition and knowledge sharing: The role of information systems
(2003) European Journal of Information Systems, 12 (1), pp. 3-17. Cited 39 times.
doi: 10.1057/palgrave.ejis.3000439

Loch, C., Kavadias, S.

Handbook of New Product Development Management
(2008) Butterworth-Heinemann is an imprint of Elsevier


Martínez-Sánchez, A., Pérez-Pérez, M., De-Luis-Carnicer, P., Vela-Jiménez, Ma.J.

Teleworking and new product development
(2006) European Journal of Innovation Management, 9 (2), pp. 202-214. Cited 6 times.
doi: 10.1108/14601060610663578

May, A., Carter, C.

A case study of virtual team working in the European automotive industry
(2001) International Journal of Industrial Ergonomics, 27 (3), pp. 171-186. Cited 34 times.
doi: 10.1016/S0169-8141(00)00048-2

McDonough III, E.F., Kahn, K.B., Barczak, G.

An investigation of the use of global, virtual, and colocated new product development teams
(2001) Journal of Product Innovation Management, 18 (2), pp. 110-120. Cited 152 times.
doi: 10.1016/S0737-6782(00)00073-4

Mezgár, I., Kovács, G.L., Paganelli, P.

Co-operative production planning for small- and medium-sized enterprises
(2000) International Journal of Production Economics, 64 (1), pp. 37-48. Cited 23 times.
doi: 10.1016/S0925-5273(99)00032-8

Mi, X., Shen, W., Zhao, W.

Research on Internet-Based System Architecture for Collaborative Product Development
(2006) Computer Supported Cooperative Work in Design II
Springer Berlin / Heidelberg


Miles, R.E., Snow, C.C., Miles, G.

The future.org
(2000) Long Range Planning, 33 (3), pp. 300-321. Cited 53 times.
doi: 10.1016/S0024-6301(00)00032-7

Mishra, A.A., Shah, R.

In union lies strength: Collaborative competence in new product development and its performance effects
(2009) Journal of Operations Management, 27 (4), pp. 324-338. Cited 18 times.
doi: 10.1016/j.jom.2008.10.001

O'regan, N., Ghobadian, A.

Testing the homogeneity of SMEs - The impact of size on managerial and organisational processes
(2004) Eur. Bus. Rev., 16, pp. 64-79. Cited 18 times.


O'Regan, N., Ghobadian, A., Sims, M.

Fast tracking innovation in manufacturing SMEs
(2006) Technovation, 26 (2), pp. 251-261. Cited 29 times.
doi: 10.1016/j.technovation.2005.01.003

Ozer, M.

The role of the Internet in new product performance: A conceptual investigation
(2004) Industrial Marketing Management, 33 (5), pp. 355-369. Cited 15 times.
doi: 10.1016/j.indmarman.2003.09.002

Perrini, F., Russo, A., Tencati, A.

CSR strategies of SMEs and large firms. Evidence from Italy
(2007) Journal of Business Ethics, 74 (3), pp. 285-300. Cited 35 times.
doi: 10.1007/s10551-006-9235-x

Pihkala, T., Varamäki, E., Vesalainen, J.

Virtual organization and the SMEs: A review and model development
(1999) Entrepreneurship and Regional Development, 11 (4), pp. 335-349. Cited 24 times.

Pullen, A., Weerd-Nederhof, P.D., Groen, A., Fisscher, O.
(2008) Configurations of external SME characteristics to explain differences in innovation performance
High Technology Small Firms Conference Twente University, Netherlands


Raymond, L., Croteau, A.-M.

Enabling the strategic development of SMEs through advanced manufacturing systems: A configurational perspective
(2006) Industrial Management and Data Systems, 106 (7), pp. 1012-1032. Cited 13 times.
doi: 10.1108/02635570610688904

Redoli, J., Mompó, R., García-Díez, J., López-Coronado, M.

A model for the assessment and development of Internet-based information and communication services in small and medium enterprises
(2008) Technovation, 28 (7), pp. 424-435. Cited 7 times.
doi: 10.1016/j.technovation.2008.02.008

Romero, F., Company, P., Agost, M.-J., Vila, C.

Activity modelling in a collaborative ceramic tile design chain: An enhanced IDEF0 approach
(2008) Research in Engineering Design, 19 (1), pp. 1-20. Cited 7 times.
doi: 10.1007/s00163-007-0040-z

Schröder, H.H.

Past, Present and Future of Knowledge Integration
(2006) Knowledge Integration-The Practice of Knowledge Management in Small and Medium Enterprises. Cited 6 times.
In: JETTER, A., Schröder HH, Kraaijenbrink J, Wijnhoven F (eds.), Physica-Verlag HD


Sills, S.J., Song, C.

Innovations in survey research: An application of Web-based surveys
(2002) Social Science Computer Review, 20 (1), pp. 22-30. Cited 76 times.

Stock, G.N., Tatikonda, M.V.

External technology integration in product and process development
(2004) International Journal of Operations and Production Management, 24 (7), pp. 642-665. Cited 19 times.
doi: 10.1108/01443570410541975

Susman, G.I., Gray, B.L., Perry, J., Blair, C.E.

Recognition and reconciliation of differences in interpretation of misalignments when collaborative technologies are introduced into new product development teams
(2003) Journal of Engineering and Technology Management - JET-M, 20 (1-2 SPEC.), pp. 141-159. Cited 14 times.
doi: 10.1016/S0923-4748(03)00008-0

Susman, G.I., Majchrzak, A.

Research issues in knowledge management and virtual collaboration in new product development: An introductory essay
(2003) Journal of Engineering and Technology Management - JET-M, 20 (1-2 SPEC.), pp. 1-5. Cited 16 times.
doi: 10.1016/S0923-4748(03)00002-X

Tiwari, R., Buse, S.

Barriers to Innovation in SMEs: Can the Internationalization of R&D Mitigate Their Effects?
(2007) Proceedings of the First European Conference on Knowledge for Growth: Role and Dynamics of Corporate R&D (CONCORD 2007)
Seville, Spain


Zhan, H.F., Lee, W.B., Cheung, C.F., Kwok, S.K., Gu, X.J.

A web-based collaborative product design platform for dispersed network manufacturing
(2003) Journal of Materials Processing Technology, 138 (1-3), pp. 600-604. Cited 41 times.
doi: 10.1016/S0924-0136(03)00156-0

Zhouying, J.


Scopus - Document details

No comments:

Post a Comment